37103-3101-000 FL 100

3M™ Mini-Clamp Plug Designed for Wiring Supplied from Japan and Asia, 2 mm, IDC, Wiremount 371 Series • Designed to accommodate typical wiring specifications per Japanese and Asian suppliers • No special wire preparation • Integrated cable retention • Design accepts multiple wire size diameters • Easy, quick, and reliable IDC termination using a standard pliers • Debris free wire termination • Mating latches provide a reliable interconnection in demanding applications • High number of mating cycles • Compact design saves board space • Helps reduce maintenance work by providing higher connection reliability • See Regulatory Information Appendix (RIA) for chemical compliance information  TS-2092-E Sheet 1 of 3 Physical Insulation: Material: Glass reinforced thermoplastic body & lower cover, transparent thermoplastic cover Flammability: UL 94V-0 Color: Black body, cover-white & color (see Table 1) Contact: Material: Copper Alloy Plating: Underplating: 2.54 µm [100 µ”] minimum Nickel Wiping Area:: 0.2 µm [8 µ”] minimum Gold with Lubricant IDC: Nickel Accommodation: Annealed Copper, high-strength Copper, or Copper Alloy. Bare, tinned, or tin overcoated, 20~26 AWG [ 0.14~0.5 ] stranded Wire Insulation: Flexible vinyl, semi-rigid vinyl, x -linked polyethylene, or ETFE (see Table 1) Marking: 3M Logo, Position Indicator, Wire Gauge, Insulator Material Electrical Current Rating: Voltage Rating: Insulation Resistance: Withstanding Voltage: 3.0 Amps 32 Volts >1 X 106 Ω at 600 VDC 1,000 VRMS at sea level Environmental Temperature Rating: -20˚C to +85˚C ambient (1.0 A max.) -20˚C to +75˚C ambient (2.0 A max.) -20 C to +60˚C ambient (3.0 A max.) (Note: UL rating is 65˚C at 3.0A, 32V) UL File No.: E68080 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini-Clamp Plug Designed for Wiring Supplied from Japan and Asia, 2 mm, IDC, Wiremount 3 and 4 Position 371 Series # Positions Dim A 3 10.4 [0.41] 4 12.4 [0.49] 15.6 [.61] >PA< AWG 24 - 26 37104 Ø 0.8 - Ø 1.0 >PC< 5.9 [.23] 0.14 - 0.2 mm2  4 3 2 1 DIM A After Termination Before Termination 5.9 [.23] 7.7 [.30] Table 1 Wire OD 1.6 ~ 2.0 [.063 ~.079] 1.2 ~ 1.6 [.047 ~ .063] 1.0 ~ 1.2 [.039 ~ .047] Part # 20-22 AWG 2206 2165 2124 Cover Color Gray 0.8 ~ 1.0 [.031 ~ .039] Blue Green Part # 24-26 AWG 3163 3122 3101 Color Orange Yellow Red C mm [Inch] Tolerance Unless Noted mm 0.0 0.00 ±.1 ±.01 [ ] Dimensions for Reference only Ordering Information 371XX - XXXX - 000 FL Positions 03 or 04 Note: Terminate using common pliers or 3M™ Scotchlok™ Crimping Tools E-9BM or E-9E 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect (RIA E1 & C1 apply) Wire AWG & OD: 2XXX = 20-22 AWG 3XXX = 24-26 AWG Wire OD - see Table 1 TS-2092-E Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini-Clamp Plug Designed for Wiring Supplied from Japan and Asia, 2 mm, IDC, Wiremount 371 Series 6 and 8 Position B A mm [Inch] Tolerance Unless Noted mm .0 .00 ±.1 ±.10 .000 [ ] Dimensions for Reference only # Positions A B (Ref.) 6 (3x2) 10.4 [0.41] 13.2 [0.52] 8 (4x2) 12.4 [0.49] 15.2 [0.60] Ordering Information 371XX - XXXX - 0W0 FL Positions 06 or 08 Note: Terminate using common pliers or 3M™ Scotchlok™ Crimping Tools E-9BM or E-9E 3 Electronics Materials Solutions Division Interconnect Solutions http://www.3M.com/interconnect Wire AWG & OD: 2XXX = 20-22 AWG 3XXX = 24-26 AWG Wire OD – see Table TS-2092-E Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Business Center Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect  Electronics Materials Solutions Division Please recycle. Printed in USA. Interconnect Solutions © 3M 2020. All rights reserved. http://www.3M.com/interconnect RIA-2217B-D 3M is a trademark of 3M Company.